Home / Products / Options, accessories Back...
	Options, accessories
	.... TPE adapter
	Touch probe input       Connection of central unit       24V DC input       signl leds of touch probe condition   Receiving Touchprobe contact signal and converts to the touch probe input of CPU of NCT control. Creates the output signals of presence and conditions of touch probe. Can be installed in electrical cabinet. Power supply request: 24V DC
	.... MU2 - EXE
	The 11uAcscs or 1Vcscs output measuring system signals are transfered to TTL signals by 5 times interpolation. It is guest card of MU2 card
	top
	.... MU2 - TACH2
	It creates feedback signal from the Encoder signal being on the axis of servomotor Inputs: outputs of 4 pcs incremental encoders Outputs: 4 pcs +/- 7V analog signals It is guest card of MU2 card
	top
	.... FEW4 Expansion card and software
	Ethernet   USB   Monitor output   Monitor input       PS/2     IDE connection   Flexibly fixed hard drive   Connection to CPU   Using FEW4 expansion card through OPEN WINDOWS operation system, integrated into NCT control, any WINDOWS compatible program can be run on it. Almost unlimited storing capacity is available like this, USB periferies can be used also and the NCT control can be connected to the company's ETHERNETnetwork. Hard disk or FLASH memory USB ETHERNET TRACK BALL FLASH DRIVE High speed DNC channel FNC program writing Event reporting VECTOR programming
	.... FNC program writing
	Program editing by filling in graphically supported interactive screen.
	top
	.... EVENT REPORTING
	Any changes of the operation status (operation mode, START/STOPmode, M3/M4 mode etc.) together with the corresponding time which are stored and given by NCT control to an evaluation WINDOWS EXCELprogram. Evaluation program can display operation statuses at the chosen period either graphically or in a tabular form. Very well can be represented stand by mode, operation modes, avarage manufacturing and usage time of the machine.
	top
	.... VECTOR programming
	We can make part programs in an extremely simple way either on a PC or on the NCTcontrol.We have an easy job with VECTOR. It does not matter if we have to start from a sketch or from 2,5D drawing or 3D model, Vector has always the simplest, most efficient variety of sources for drawing and manufacturing. Machine operators without previous CAD/CAM knowledge can be tought in few hours and can use it safe. Editing We can draw easily dots, lines, circles, splines etc. with it. Roundings, chamfer can be put easily between chosen contour elements or into the chosen contour section one by one or all at once. NC programing at 2,5D Although for most machining the 2D or 2,5D CAM is suitable, the VECTOR is suitable for handling 3D data because the CAD systems work more and more in 3D. Efficient machining strategy Contour machining Pocket milling with islands Machining of pocket with special geometry 3D contour machining Multi surface machining Start strategies Finish strategies Engraving of WINDOWS fonts Geometrical transformations   Handling of job phases Every machining job phase is stored in a job chart. This chart rates the simulation of machining. Here appears the execution time of work phases and the necessary time of whole machining for the workpiece. We can edit, rearrange, delete, switch on - off and simulate the work phases stored in the job chart. If we find suitable the machining simulation we can generate the technological program by pushing one button. Integrated tool handling We can choose the suitable tool from the tool library with the parameters of the tool and the belonging part parameters. We can extend, edit the tool library according to our requirements. Reusing of CNC programs which are not made in VECTOR The REDRAWING function makes it possible to load an old NC program written in G-CODE form into the VECTOR and generate the contour. Than we can edit the drawing and generate the machining program.
	top
	.... HW -INT handwheel can be built-in operator panel
	1 revolution means 100 positions It produces 25 TTL periods through 2 channels (A, AN, B, BN) Outputs are connected to a CAN BUS card wich evaluates impulses 4 times so it ensures 100 impulses/ revolution resolution
	top
	.... HW EXT external handwheel
	It involves a hadwheel, axis and resolution (length of step) selection by yaxley switch, and an emergency-stop push button. It is connnected by 0.8/3.2m or 1.6/6.4 m spiral (expandable) cable to the connector installed on machine tools.
	top