|
|
 |
NCT
Softwares |
| |
|
| |
|
| |
| .... |
SOFTWARE
SUPPORTING PLC PROGRAM COMPLETION |
|
| |
|
| |
PExxx_00:
Executes syntactic check on
text-format PLC programs prepared with any text editor.
The program searches: -modules, - conditions, -part programs.
Prepares statistics on programmed: -inputs, -outputs, -flag
bits, -timers, -counters.
|
| |
|
| |
|
| |
|
| |
| .... |
SERIALDATAINPUT
PROGRAM |
|
| |
|
| |
WINRS:
Intelligent program transfer
between NCTcontrol and PC. The program is running on WINDOWS
operation system.
Simple serial program transferring
Intelligent, automatic serial program transmission
DNC
NCTsystem loading
|
| |
|
| |
|
| |
|
| |
| .... |
SIMULATOR
PROGRAM FOR TESTING PART PROGRAMS |
|
| |
|
| |
PROG:
Simulator Program for NCTturning
and milling controls runs on tha DOS WINDOWS of a PC. The
operation, displays and programming entirely corresponds
to those of NCTcontrol. Ideally used for exercising programming,
teaching as well as for testing part programs prepared on
CAD/CAM systems.
|
| |
|
| |
|
| |
|
| |
| .... |
PROGRAM
PACKAGE FOR SETTING DRIVES |
|
| |
|
| |
DPP 03:
Running on WINDOWS operation
system, a program package for setting and testing drives.
The drive and the computer can be connected through RS232.
Speed control
loop setting is started by loading the parameter package
of the appropriate motor type, then the main control characteristics
are fine tuned simply and quickly with the help of virtual
pots occurring on the screen. Results of the intervention
can be immediately checked by the motor behavior and by
the change of motor characteristics displayed on the screen.
|
| |
|
| |
|
| |
|
| |
| .... |
Program packages
for supponting of touch probe |
|
| |
|
| |
DIGI:
Digitizing program package
for NCTcontrols for sensing free surfaces and 2D contours.
The NCTcontrol memorises, at the touch points the X, Y,
Z coordinates of touch probe ball center. These data are
stored in a part program of user.
Data format: ASCII text
(X100.000Y110.000Z-50.010LF)
There are two possibilities for machining:
1. The milling tool has the same radius as the touch probe
ball. In that
case the part program can be made directly from the touch
points.
2. From the stored data by the control with CAD/CAM program
possible to create the surface of the workpiece, and with
the usual
way can be generated the part program.
MES:
Macro program package is for
measuring in the most common measurment cases the workpiece
and tools in the working area of machine tools. It is suitable
for fast and accurate measuring of surface, tap, bore, corner
point, etc. It makes possible the accurate machining of
workpiece (even it is not accurately fixed) after measuring
the position of it, by rotating the coordinate system.
|
Tap
measure
|
Coordinate
axis rotation
|
|
Axial
and radial surface measurement
|
Bore
center search
|
|
Corner
point search
|
|
| |
The FNC program writing, event reporting,
VECTOR programming can be found at options.
|
| |
|
| |
|
| |
|
